I. OVERVIEW

　　MGG Wafer Magnetic Flowmeter s a kind of flowmeter with high performances and reliability. It use a new generation of technical lining technologies and special mirror.

II. CHARACTERISTICS

• Measurement is independent of fluid density, viscosity, humidity, temperature, pressure and conductivity.
• There are no obstacle parts in the measuring tube, no pressure damage to the tube of which the straight part is of low requirement.
• A new, exclusive high quality lining technology and a special mirror-finish PFA lining are used in the sensor.
• The sensor with advanced processing technology is of nice resistance to the negative pressure.
• A removable electrode which can be used in the sensor makes the maintenance easy.
• The liquid crystal display in the converter of the Magne W3000 PLUS makes the reading easy under the sun or in the dark room.
• The converter of the Magne W3000 PLUS can at the same time display the percentage of volume flow, the real flow and accumulative flow.
• Installed on the tube forming with the standard type on angle equal to or small than 90°, the revolving display screen improve the visibility of the integrated flow meter.
• In bad environment parameter can be without uncovering the cover of the converter set up through the infrared ray touch nub.
• The converter has alarm output function of self-diagnosis, empty load test, high and low limit of the flow, two-stage flow value, etc.

III. TECHNICHAL PARAMETERS

• Nominal Bore: DN10～DN200
• Accuracy : 0.5%，±0.3％ or ±0.2％
• Medium Temperature : Remote type -10℃～+180℃ Integral type -10℃～+80℃
• Ambient Temperature: -25℃～+60℃
• Conductive Ratio of the Medium: ≥3μs/cm
• Lining Material: PFA
• Electrode material: OCr18Ni12Mo2Ti, Hastelloy B, Hastelloy C, Ti, Ta, Pt.
• Electrode type: Removable electrode
• Connection: Integral model / Remote model
• Housing Protection: flow sensor IP65, IP68 Optional
• Converter: IP67
• Ex-proof mark: Sensor of Ex-proof type: ExmIIT4, ExmdIIBT4