The MGG24C Converter of Japan Yamatake is used not only in general process test, but also in the test of mine pulp, paper pulp and pastry liquid.

II.CHARACTERISTICS

• Main power: AC100V，110V，115V/120V±10%
  　　　　 　 AC200V，220V，230V/240V±10%
  　　　　　　DC24±10%
• Frequency: 50Hz or 60Hz
• Power assumption: ≤13W（17VA）
• Display and push-button: The three-line LCD display with back lighting is used to display the nerccntage of flow, the instantaneous flow and total flow.
• Arithmometer: It is used for accumulative counting of the right total flow, reverse total flow.
• Input signals:
  　a. Flow signal: voltage signal of the direct ration to the flow from the director.
  　b. Contact point input(free choice): solid contact point or nor-voltage contact point.
• Output signals:
  　a. Analog output: 4～20mADC
  　　1. Without SFC communication: 0.8mA ～ 22.4mA（－20% ～＋115%） Load resistance: 0～600Ω
  　　2. With SFC communication: 3.2mA～22.4mA（－5%～＋115%） External power supply for SFC communication: DC16～45V
  　　3. Load resistance(Ω)=(external power supply -8.5V) /0.025
  　b. Data output: DE
  　c. contact point output (free choice): Open collecting electrode, Contact point capacitance 30 VDC maximum, 200mA maximum
  　　1. Alarm output: Outputs an alarm under the following conditions: self-diagnostic result, empty detection and high/low limit alarm.
  　　2. Range switching output: Outputs the status of flow range, large/small in dual range, normal or reverse.
  　　3. Counter preset status output(for pulse output model): Activates when the counter reaches the preset value.
  　　4. Self-check result output: Activates only when a self- diagnostic abnormality occurs.
  　　5. Empty detection output: Activates only when an empty status is occurs.
  　　6. Activates when the first high/low limit alarm(H/L) occurs and the second high/low limit alarm (HH/LL) occurs.
  　d. Pulse output(optional): Open collector, pulse frequency 2000Hz max, pulse width 0.3 to 999.9ms, random setting or fixed at 50% of the duty
  　e. Communication signal: With HART communication or FF field-bus
• Damping time: Adjustable between 0.5 and 199.9 seconds.
• Low flow cutoff: Adjustable between 0 to 10% of setting range. Below selected value, output is driven to the zero flow rate signal level
• Lighting protection: 12kV, 1000A Equipped with the lightning arrester in the power source and external input and output terminals
• Power failure: An EEPROM retains data record of totalized value when pulse output is used (retention period approximately 10 years)　Frequency: 50Hz or 60Hz, DC24±10%