I. OVERVIEW

　　MGG High Pressure Electromagnetic Flowmeter is composed of high-pressure electromagnetic flow sensor which is manufactured with special technics and expertise and MGG 24C converter , It is specially used in.

II. CHARACTERISTICS

• Measurement is independent of fluid density, viscosity, humidity, temperature, pressure and conductivity.
• There are no obstacle part in the measuring tube, no pressure damage to the tube of which the straight part is of low requirement.
• The sensor with grounded electrode guarantees the grounding well.
• The sensor with advanced processing technology is of nice resistance to the negative pressure.
• The liquid crystal display in the converter of the Magne W3000 PLUS makes the reading easy under the sun or in the dark room.
• The converter of the Magne W3000 PLUS can at the same time display the percentage of volume flow, the real flow and accumulative flow.
• Installed on the tube forming with the standard type on angle equal to or small than 90°, the revolving display screen improves the visibility of the integrated flow meter.
• In bad environment parameter can be without uncovering the cover of the converter set up through the infrared ray touch nub.
• The converter has alarm output function of self-diagnosis, empty load test, high and low limit of the flow, two-stage flow value, etc.
• High-pressure type electromagnetic flow sensor using F46 lining manufactured with special technics and expertise is specially applied in industries of oil, chemistry etc.

III. TECHNICHAL PARAMETERS

• Nominal Bore: DN25～DN100
• Accuracy: ±0.5％, ±0.3％ or ±0.2％
• Lining material: F46
• Electrode material: 316L Stainless steel
• Conductive ratio of the medium: ≥3μs/cm
• Nominal Pressure: 6.3, 10, 16, 25, 32MPa
• Temperature of Medium: 0～+80℃（Converter） 0～+180℃（Sensor）
• Ambient Temperature: -25℃～+60℃
• Power supply: 220V 50Hz or 24VDC
• Connection Mode: Flange mode